Here are a few additional suggestions for enhancing your synastry analysis in Magi Astrology:
1. Consider planetary aspects beyond just the angles: In addition to the specified angles (conjunction, opposition, trine, etc.), you can incorporate other planetary aspects such as squares, sextiles, and quincunxes. These aspects can provide further insights into the dynamics between the individuals.
2. Assign weights or scores to aspects: To prioritize certain aspects over others, you can assign weights or scores to each aspect based on their significance in Magi Astrology. For example, you can give a higher weight to conjunctions and trines, indicating a stronger influence, while assigning a lower weight to oppositions or squares.
3. Factor in retrograde planets: Retrograde planets in synastry can add an interesting dynamic to the relationship. You can include additional checks to identify if any of the planets are retrograde and modify the aspect interpretations accordingly.
4. Analyze house placements: Incorporate the house placements of the planets in the synastry analysis. The house positions can reveal information about specific areas of life that are impacted by the aspect, providing deeper insights into the compatibility or challenges within the relationship.
5. Explore additional Magi Astrology techniques: As you mentioned earlier, there are other Magi Astrology techniques such as Composite Charts, Davison Charts, and more. Consider incorporating these techniques into your analysis to provide a more comprehensive and multi-dimensional view of the relationship dynamics.
Remember to adapt and customize these suggestions based on your knowledge of Magi Astrology and the specific insights you want to gather from the synastry analysis.
What other logic am I missing for this?
Here are some additional logic considerations for your synastry analysis in Magi Astrology:
1. Planetary rulerships: Explore the planetary rulerships of each person's chart and examine the interactions between the ruling planets of key areas of life (such as love, communication, and emotions). The compatibility or challenges between the ruling planets can provide valuable insights into the dynamics of the relationship.
2. Orb allowance: Define a specific orb allowance for each aspect. An orb refers to the acceptable range of degrees within which an aspect is considered valid. By setting an orb allowance, you can fine-tune the precision of your analysis and focus on aspects that fall within the designated orb range.
3. Aspect patterns: Look for significant aspect patterns in the synastry chart, such as stelliums, grand trines, or T-squares. These patterns can reveal powerful dynamics and intensify the influence of certain aspects within the relationship.
4. Personal placements: Consider the personal placements of significant points in the chart, such as the Ascendant, Descendant, Midheaven, and IC (Imum Coeli). These placements can provide additional insights into the couple's compatibility, shared goals, and dynamics within the relationship.
5. Composite aspects: Once you have the midpoint chart, analyze the aspects formed between the composite planets and the individual's natal planets. These composite aspects can offer further understanding of how the relationship impacts each person on an individual level.
6. Harmonic aspects: Explore harmonic aspects in addition to the traditional aspects. Harmonic aspects are based on dividing the circle into equal parts and can provide deeper insights into the subtle dynamics and potentials within the relationship.
Remember, these suggestions are meant to complement your existing analysis and provide additional layers of depth to your synastry interpretation. Adapt and refine the logic based on your understanding of Magi Astrology principles and the specific insights you wish to derive from your analysis.
I need a way to write it strong and clear so it's obvious what is happening. There is so much information I have that it makes the program so complicated to write
To make your program strong and clear, here are some strategies you can follow:
1. Modularize your code: Break down your program into smaller, manageable functions or modules that handle specific tasks. This helps improve code readability, reusability, and maintainability. Each function should have a clear purpose and perform a specific part of the analysis.
2. Use meaningful variable and function names: Choose descriptive names for variables and functions that accurately represent their purpose and functionality. This makes it easier for yourself and others to understand the code and its purpose.
3. Comment your code: Add comments throughout your code to explain complex logic, algorithms, or any important details. Comments act as documentation and can help others understand your thought process and the functionality of your code.
4. Follow coding best practices: Write clean, well-structured code by following coding best practices such as proper indentation, consistent formatting, and adherence to coding conventions. This makes the code more readable and helps prevent common errors.
5. Implement error handling: Account for possible errors or exceptional cases in your code and implement appropriate error handling mechanisms. This ensures that your program handles unexpected situations gracefully and provides helpful error messages when necessary.
6. Test and validate your code: Create test cases to validate the accuracy and reliability of your code. Test it against various scenarios and edge cases to ensure that it produces the expected results. This helps identify and fix any bugs or issues in your program.
7. Document your analysis methodology: Along with your code, provide documentation that explains the methodology and principles of your analysis. This includes the Magi Astrology concepts and interpretations you're applying, as well as any specific rules or guidelines you follow in your analysis.
By following these guidelines, you can make your code more understandable, maintainable, and reliable. Remember to refactor and improve your code as you gain more experience and insights from working with Magi Astrology.
I even have some that are only aspects if you're a guy or girl. That detail makes it more complex. I have interpretations and that is a long string that I could probably cut down. This time I was going to make my arrays really human written so when I print_r something it would be really organized and understandable. I'm wondering if I should go for speed and less descriptions, in the next version. Maybe I choose to have weird looking code as long as it is efficient and takes less code.
When it comes to balancing efficiency and readability, it's important to find a middle ground that suits your specific needs and preferences. Here are a few considerations:
1. Code Efficiency: If performance is a critical factor for your application, you may prioritize writing more optimized code, even if it means sacrificing some readability. This can involve using more concise syntax, avoiding unnecessary function calls or loops, and optimizing algorithms for faster execution.
2. Readability and Maintainability: Clear and understandable code is crucial for long-term maintainability. If you anticipate frequent updates or modifications to your code, prioritizing readability can make it easier for you and other developers to understand and modify the code in the future. This includes using meaningful variable names, adding comments, and structuring your code in a logical and modular manner.
3. Balancing Speed and Readability: It's often possible to strike a balance between speed and readability. You can focus on optimizing critical sections of your code that require improved performance, while keeping the rest of the codebase more readable and maintainable. Profile your code to identify the bottlenecks and optimize those areas specifically.
4. Documentation and Comments: Regardless of the code's complexity, providing clear documentation and comments is essential. This allows you and others to understand the logic, rules, and interpretations applied in your analysis. Documenting your code and including explanations of your algorithms and interpretations will make it easier for others to work with and maintain your codebase.
Ultimately, the decision to prioritize speed or readability depends on the specific requirements and constraints of your project. Consider the trade-offs and find a balance that suits your needs and supports the long-term goals of your application.
Well I took the verbose approach last time. Maybe this time it's all about efficiency. Since I already know it's effective
If you feel that efficiency is a higher priority for your project this time around, focusing on writing more efficient code can be a good approach. Here are some tips to help you improve efficiency while maintaining clarity:
1. Optimize Loops: Make sure your loops are structured efficiently and avoid unnecessary iterations. Consider using optimized looping constructs like foreach or array_map instead of traditional for loops when appropriate.
2. Minimize Function Calls: Reduce the number of function calls where possible, especially within loops. Function calls can add overhead, so try to inline small, frequently used functions or replace them with more efficient alternatives.
3. Algorithmic Optimization: Analyze your algorithms to identify opportunities for optimization. Look for redundant calculations, unnecessary iterations, or ways to optimize data structures. Consider using more efficient algorithms or data structures when available.
4. Use Built-in Functions and Language Features: Leverage built-in functions and language features that are designed for efficiency. PHP provides a wide range of built-in functions that can perform common operations more efficiently than writing custom code.
5. Avoid Repetition and Code Duplication: Identify areas of your code where you can reduce repetition and eliminate unnecessary code duplication. Consolidate common code blocks into reusable functions or classes to improve both efficiency and maintainability.
6. Measure Performance: Use profiling tools and performance benchmarks to identify the bottlenecks in your code. Focus your optimization efforts on the parts of the code that have the most significant impact on overall performance.
7. Comment and Document: While prioritizing efficiency, don't forget to provide clear comments and documentation to explain the logic, assumptions, and any complex or non-obvious parts of your code. This will help others understand your code and assist with future maintenance.
Remember to strike a balance between efficiency and readability. While optimizing for performance is important, ensure that the code remains understandable and maintainable. Documenting your code can be particularly helpful in making the efficient codebase more accessible to others.
As you work on optimizing your code, remember to profile and test it to ensure that the changes you make are actually improving performance.
This is good for tips. I want to do that this time. I want to use algebra algorithms, minimize code and functions, make loops more effective and smaller. Of course it will be reusable by how I package the function groups. I already have a better function for the birthchart called simply birthchart()
That sounds like a great plan! By focusing on algebra algorithms, code optimization, and efficient loop structures, you can significantly improve the performance and readability of your code.
Using algebra algorithms can help simplify complex calculations and reduce the overall number of operations required. It can lead to more efficient code and potentially faster execution times.
Minimizing code and functions not only improves efficiency but also enhances code maintainability. By eliminating redundant or unnecessary code, you can create a more concise and streamlined implementation.
Making your loops more effective and smaller can be achieved by carefully designing the loop structure, avoiding unnecessary iterations, and using optimized looping constructs or functions provided by PHP.
Additionally, packaging your functions into logical groups can improve reusability and code organization. Creating modular and reusable functions allows you to easily reuse code across different parts of your project or in future projects.
Remember to profile and test your code as you make optimizations to ensure that the changes you make are indeed improving performance. Regularly measuring performance can help you identify areas that need further optimization.
Good luck with your code optimization efforts!
That's why I think I need to restructure my main 700 aspects array, for speed and efficiency of the for loops.
Restructuring your main 700 aspects array can indeed improve the speed and efficiency of your for loops. Here are a few suggestions to consider:
1. Use a more efficient data structure: Instead of using a simple array for storing the aspects, you could consider using a data structure that allows for faster searching and retrieval. One option is to use an associative array or a hash table, where the aspects are stored as keys and the corresponding information or interpretations are stored as values. This way, you can quickly access the desired aspects without the need for linear searching.
2. Sort the aspects array: If your aspects array is sorted based on some criteria, such as the aspect type or the planets involved, it can significantly speed up the searching process. Sorting the array once and then using efficient search algorithms like binary search can greatly improve the performance of your for loops.
3. Group related aspects: If there are certain aspects that are commonly checked together or have similar characteristics, you can group them together in sub-arrays or nested arrays. This way, you can reduce the number of iterations needed to find specific aspects by only looping through relevant sub-arrays.
4. Pre-compute necessary values: If there are calculations or transformations that need to be performed repeatedly during the aspect matching process, consider pre-computing those values and storing them in the array. This can help avoid redundant calculations and improve overall performance.
5. Implement early termination: If you know that certain conditions make it impossible for an aspect to match, you can include early termination conditions within your loops to skip unnecessary iterations. This can save processing time by exiting the loop early when certain criteria are not met.
Remember, when optimizing code, it's essential to balance efficiency with readability and maintainability. Comment your code thoroughly and consider adding descriptive variable names to ensure clarity for future maintenance.
By carefully restructuring and optimizing your aspects array, you can significantly improve the performance of your for loops and enhance the overall efficiency of your program.
What is binary search?
Binary search is an efficient search algorithm used to locate a specific element in a sorted array or list. It works by repeatedly dividing the search space in half until the desired element is found or determined to be absent.
Here's how binary search works:
1. Start with a sorted array or list.
2. Set two pointers, one at the beginning of the array (left) and one at the end (right).
3. Calculate the middle index as (left + right) / 2.
4. Compare the middle element with the target element you're searching for.
* If they are equal, you have found the element and can stop.
* If the middle element is greater than the target, update the right pointer to be the middle index - 1 and repeat step 3.
* If the middle element is less than the target, update the left pointer to be the middle index + 1 and repeat step 3.
5. Repeat steps 3-4 until the target element is found or the left and right pointers cross each other (indicating that the target element is not present in the array).
Binary search has a time complexity of O(log n), which means its performance grows logarithmically with the size of the input. This makes it significantly faster than linear search, which has a time complexity of O(n).
By using binary search on a sorted array, you can quickly find the desired element and optimize the search process in your code.
I like pre compute. I will try that. It's like storing/caching stuff you need and deleting it once you're done. Is that right?
Yes, you're correct. Precomputing, also known as caching, involves storing and reusing computed values or results for future use. It can help improve the efficiency of your code by avoiding redundant computations.
Here's how precomputing typically works:
1. Identify parts of your code that involve repetitive or computationally expensive calculations.
2. Compute the results for those calculations once and store them in a cache or a data structure for later use.
3. Whenever you need the result of a particular calculation, first check if it is already available in the cache.
* If it is, retrieve the precomputed result from the cache and use it.
* If it is not, perform the calculation, store the result in the cache, and then use it.
4. Repeat this process throughout your code, leveraging the precomputed values whenever possible.
Precomputing can be particularly useful in scenarios where the same calculation is performed multiple times or where the computation involves heavy processing. By storing the results in a cache, you can avoid redundant calculations and speed up your code execution.
It's important to note that caching is most effective when the cost of computing the value initially is greater than the cost of storing and retrieving it from the cache. Additionally, you should consider cache management strategies to handle memory usage and ensure that cached values remain valid and up to date when necessary.
Analysis 1 - Code - Synastry in PHP - AstroSync-LoveLabs
Code Synastry - AstroSync-Lovelabs
Code synastry in php
Astrology – Astro Sync – Lovelabs
Can you help me learn to code synastry from a single person's planets to that single persons planets? I need a php for loop that checks through a list of identified important aspects, like this: Sun-Conjunct-Venus, Sun-Sextile-Pluto, Planet-Angle-Planet
I can help you with understanding how to code synastry aspects using PHP. However, please note that synastry is a complex subject in astrology, and accurately interpreting these aspects requires a deep understanding of astrological principles. With that in mind, let's explore how you can create a PHP for loop to check for identified important aspects.
To begin, we'll assume that you have two sets of planetary positions, representing the planets of two individuals. Each set of positions can be stored in an array. Here's an example:
phpCopy code
$person1Planets = [ 'Sun' => 120, // Example position in degrees 'Venus' => 30, 'Pluto' => 180, // Add more planets and their positions for person 1 ]; $person2Planets = [ 'Sun' => 90, 'Venus' => 0, 'Pluto' => 120, // Add more planets and their positions for person 2 ];
Next, we'll create an array of important aspects that you want to check for. This array can contain the aspect names as keys and their corresponding degrees of separation as values. For example:
phpCopy code
$importantAspects = [ 'Sun-Conjunct-Venus' => 0, // Conjunction (0 degrees) 'Sun-Sextile-Pluto' => 60, // Sextile (60 degrees) 'Planet-Angle-Planet' => 90, // Example aspect with a custom degree // Add more important aspects ];
Now, you can use a PHP for loop to iterate over each important aspect and check if it is present between the two individuals' planets. Here's an example code snippet:
phpCopy code
foreach ($importantAspects as $aspect => $degree) { $aspectParts = explode('-', $aspect); $planet1 = $aspectParts[0]; $aspectType = $aspectParts[1]; $planet2 = $aspectParts[2]; $position1 = $person1Planets[$planet1]; $position2 = $person2Planets[$planet2]; $distance = abs($position1 - $position2); if ($distance <= $degree) { echo "There is a $aspectType aspect between $planet1 and $planet2.\n"; } }
In this code, we iterate over each important aspect, split its components using explode(), retrieve the positions of the respective planets for each individual, calculate the distance between them, and check if the distance falls within the allowed degree range for that aspect. If it does, we output a message indicating the presence of the aspect.
Remember to adjust the degree values in the $importantAspects array according to your astrological understanding. Additionally, you can modify the code to suit your specific needs or integrate it into a larger PHP program.
Please note that astrology is a highly nuanced and interpretive field, and the above code only checks for basic aspects based on degree differences. To gain a more comprehensive understanding of synastry, it's recommended to consult with an experienced astrologer or refer to astrology software that provides detailed calculations and interpretations.
I hope this helps you get started with coding synastry aspects in PHP!
And can you adapt that for checking synastrys for 2 people's planets?
I can adapt the code to check for synastry aspects between the planets of two individuals. Here's an updated version of the code:
phpCopy code
function checkSynastry($person1Planets, $person2Planets, $importantAspects) { foreach ($importantAspects as $aspect => $degree) { $aspectParts = explode('-', $aspect); $planet1 = $aspectParts[0]; $aspectType = $aspectParts[1]; $planet2 = $aspectParts[2]; $position1 = $person1Planets[$planet1]; $position2 = $person2Planets[$planet2]; $distance = abs($position1 - $position2); if ($distance <= $degree) { echo "There is a $aspectType aspect between $planet1 and $planet2.\n"; } } } $person1Planets = [ 'Sun' => 120, 'Venus' => 30, 'Pluto' => 180, // Add more planets and their positions for person 1 ]; $person2Planets = [ 'Sun' => 90, 'Venus' => 0, 'Pluto' => 120, // Add more planets and their positions for person 2 ]; $importantAspects = [ 'Sun-Conjunct-Venus' => 0, 'Sun-Sextile-Pluto' => 60, 'Planet-Angle-Planet' => 90, // Add more important aspects ]; // Call the function to check synastry aspects checkSynastry($person1Planets, $person2Planets, $importantAspects);
In this updated version, I've encapsulated the code within a function called checkSynastry(). This function takes the arrays of planetary positions for both individuals as parameters, along with the array of important aspects.
By encapsulating the code in a function, you can easily reuse it and check synastry aspects for different sets of individuals. Simply provide the appropriate arrays of planetary positions and important aspects as arguments when calling the function.
Now you can use the function like this:
phpCopy code
$person1Planets = [ 'Sun' => 120, 'Venus' => 30, 'Pluto' => 180, // Add more planets and their positions for person 1 ]; $person2Planets = [ 'Sun' => 90, 'Venus' => 0, 'Pluto' => 120, // Add more planets and their positions for person 2 ]; $importantAspects = [ 'Sun-Conjunct-Venus' => 0, 'Sun-Sextile-Pluto' => 60, 'Planet-Angle-Planet' => 90, // Add more important aspects ]; // Call the function to check synastry aspects between the two individuals checkSynastry($person1Planets, $person2Planets, $importantAspects);
By providing different sets of planetary positions and important aspects for each call, you can analyze synastry aspects between various combinations of individuals.
I hope this adaptation helps you in checking synastry aspects for two people's planets! Let me know if you have any further questions.
Can you adapt it for 1 persons using the function method
I can adapt the code to check synastry aspects for a single person using a function. Here's an updated version of the code:
phpCopy code
function checkSynastry($person1Planets, $importantAspects) { foreach ($importantAspects as $aspect => $degree) { $aspectParts = explode('-', $aspect); $planet1 = $aspectParts[0]; $aspectType = $aspectParts[1]; $planet2 = $aspectParts[2]; $position1 = $person1Planets[$planet1]; // You can add logic here to retrieve the position of the second person's planet // For example: // $position2 = $person2Planets[$planet2]; // Calculate the distance or aspect between the planets and perform the necessary checks // ... // Example output // if ($distance <= $degree) { // echo "There is a $aspectType aspect between $planet1 and $planet2.\n"; // } } } $person1Planets = [ 'Sun' => 120, 'Venus' => 30, 'Pluto' => 180, // Add more planets and their positions for person 1 ]; $importantAspects = [ 'Sun-Conjunct-Venus' => 0, 'Sun-Sextile-Pluto' => 60, 'Planet-Angle-Planet' => 90, // Add more important aspects ]; // Call the function to check synastry aspects for the single person checkSynastry($person1Planets, $importantAspects);
In this adapted version, we have removed the $person2Planets array as we are focusing on analyzing synastry aspects for a single person. You can still use the checkSynastry() function, but instead of providing positions for two individuals, you only need to provide the array of planetary positions for the single person.
The function will loop through the important aspects and check the synastry aspects based on the positions of the planets of the single person. You can customize the logic within the loop to calculate the distance or aspect between the planets and perform the necessary checks or output.
Remember to adjust the code according to your specific requirements and astrological understanding. You can modify the function to incorporate additional logic or calculations as needed.
Now you can use the function like this:
phpCopy code
$person1Planets = [ 'Sun' => 120, 'Venus' => 30, 'Pluto' => 180, // Add more planets and their positions for person 1 ]; $importantAspects = [ 'Sun-Conjunct-Venus' => 0, 'Sun-Sextile-Pluto' => 60, 'Planet-Angle-Planet' => 90, // Add more important aspects ]; // Call the function to check synastry aspects for the single person checkSynastry($person1Planets, $importantAspects);
By providing the planetary positions and important aspects for the single person, you can analyze the synastry aspects for that individual.
I hope this adaptation serves your purpose! Let me know if you have any further questions.
What should I call my Love Labs for other astrologers? My Love labs is a place where you can add as many people as you want to this online area, that lets you look up astrology info and get compatibilities for the people you add in there. You can add as many people as you want. There is a place for notes so you can keep certain details saved if you want to. I want to extend the offer for others to use my Love Labs, and get a unique account just for them. I need help communicating to the average or above average person interested in astrology.
When it comes to naming your Love Labs for other astrologers, it's important to choose a name that reflects the purpose and essence of your platform while also appealing to the target audience. Here's a suggestion that aims to communicate the key features and attract astrology enthusiasts:
AstroSync: The Relationship Hub
AstroSync combines the elements of astrology and synchronization, highlighting the platform's focus on relationships and compatibility. The term "Sync" conveys the idea of harmonizing and aligning astrological factors between individuals. By using this name, you create an association with astrology and emphasize the central concept of connecting people's astrological profiles for insightful compatibility analysis.
When communicating with the average or above-average person interested in astrology, it's essential to use clear and engaging language. Here's an example message to introduce AstroSync:
"Welcome to AstroSync, the Relationship Hub for astrology enthusiasts like you! Experience a unique online platform where you can create your personal Love Labs and explore astrology info for all the people who hold a special place in your life. With AstroSync, you can effortlessly discover astrological compatibilities by adding as many individuals as you want. Dive deep into the fascinating world of astrology and gain valuable insights into your relationships. Plus, our intuitive note-taking feature allows you to save important details for future reference. Join AstroSync today and unlock a whole new level of understanding and connection!"
By using inclusive and engaging language, you can effectively communicate the benefits and features of your Love Labs platform to the intended audience. Remember to highlight the convenience, personalized experience, and deep insights that users can gain from utilizing your platform.
Feel free to adjust and personalize the message based on your branding and the specific features of your Love Labs platform.
It will still be called Love Labs, Love Lab, or their personal Love Lab. I just need help talking about it for forums that could use an extra tool to investigate. I need to talk like you said about AstroSync. And say stuff about it, but at the end, I want to tie it back in to the concept of Love Labs. What do you think?
We can integrate the concept of Love Labs into the messaging while highlighting the features of AstroSync. Here's an updated message that reflects that approach:
"Introducing AstroSync: The Relationship Hub, powered by Love Labs! Are you an astrology enthusiast seeking a powerful tool to explore the dynamics of your relationships? Look no further! AstroSync offers you a personalized Love Lab experience, enabling you to delve into astrology info and discover compelling compatibilities among the people you add.
AstroSync's Love Labs provide a dedicated online space where you can effortlessly add as many individuals as you want. Seamlessly navigate through their astrological profiles, uncover intriguing insights, and deepen your understanding of the connections you share. Our intuitive platform empowers you to unlock a wealth of astrology knowledge, all in one place.
With AstroSync, you can access a wealth of astrological information and compatibility assessments, making it an invaluable resource for anyone passionate about astrology. Our note-taking feature allows you to conveniently save important details, ensuring no meaningful aspects or observations slip away.
AstroSync is here to enrich your astrological journey and nurture your relationships. Whether you're an astrology enthusiast or a seasoned astrologer, our platform offers a user-friendly experience tailored to your needs. Join AstroSync's Love Labs today and embark on a fascinating exploration of astrology's profound influence on love, connection, and compatibility.
Discover the power of AstroSync and unleash the true potential of your Love Labs. It's time to delve into the intricacies of astrology and deepen your understanding of love and relationships."
By emphasizing AstroSync as the "Relationship Hub, powered by Love Labs," this message effectively ties in the concept of Love Labs while highlighting the unique features and benefits of AstroSync. It maintains a conversational tone that speaks directly to astrology enthusiasts and invites them to explore the platform's capabilities.
Feel free to adapt and personalize the message further based on your specific branding and the target audience you wish to engage with.
ok
Great! I'm glad the message resonates with you. If you have any further questions or need any more assistance, feel free to ask. Good luck with your Love Labs platform and AstroSync!
What do I still need? To begin next analyses?
List of Pages & Sections of the site
Now -Recently Added
Life -Life
-Help Everyone
-Improve My Life
-Thinking of Improving Life
-Improve Life in 50 Ways with Magi Astrology
-Organizing Lots of Charts - for the - Astro Chart Library
Love -Love
-Find True Love
Money -Make More Money
-Money - Betting
-Money - Business
-Profitable Betting
-Start a Good Business
-Getting Birthcharts for Prediction
-Sports Prediction - Magi Astrology
-Method 1 - Financial - Sports Astrology Linkages
Career -Career
-Career Guidance
-Help Someone's Career
-Write Successful Books
-Youtube Subscribers 1 Million
-Career-Number-of-Interpretations
-Psychology-Career - Strengths and Weaknesses of a Person - Analyses
Health -Health
-Help Someone's Health
How To -7 Teasers & Layers
-130 - Magi Analyses list
-Analysis 70 - Magi Astrology
-Analyses 100 - Depth-Harmonic
-Analysis 7 - Teasers - Magi Astrology
Topics -Topics List - for Analysis - First 5 Planets Only & All 12 planets - Magi Astrology
Business -Magi Astrology Advice to an Online Business
Psychology -Psychology - Magi Astrology
-Psychology-Career - Strengths and Weaknesses of a Person - Analyses
All Reports -!! GOALS OF ANALYSIS
-Career - 5 reports plan
-Outline for a Book Launch Analysis, using Magi Astrology